Checkline LMI-LMC Manual de usuario descargar pdf (Pagina 5)

To eliminate material slip, adjust the

electronic yarn consumption meter in

such a way that the angle of material

contact with the measuring wheel is

120° minimum (see Fig. 2). It is

recommended to measure the yarn

consumption for several machine cycles.

3.0 ME

ASURING

OCEDURES

LMI AN

LMC

3.1 Measuring with Manual Start /Stop

The Electronic Yarn Consumption Meter accurately measures the yarn

consumption of a single yarn feeding system at a running knitting machine

with fixed or rotating cylinders. The instrument is stationary mounted between

filament break monitor and filament guides using the supplied magnetic base

(see Fig. 1).

To select the number of revolutions:

00 = Manual Start / Stop

1 to 99 = Automatic Start / Stop Signal

The preselect switches and allow selecting the desired number of cylinder

revolutions for the measuring cycle. The number of revolutions can be set from

0 to 99.

Preselection Example:

Desired number of revolutions = 54

Set preselect switch x10 to position 5. Set preselect switch x1 to position 4.

NOTE: Use a fine screwdriver with a 2mm blade to set the preselect switches.

After every change of the setting of the preselect switches the ON / RESET

switch must be pressed to activate the new setting.

Preselect switch

x 10

Preselect switch

x 1

ON / RESET

Fig.1

Fig.2

Fig.5

1 2 3 4 5 6 7

Sin comentarios

Checkline LMI-LMC Manual de usuario Pagina 5