Checkline WTTM-GEN1 Manual de usuario descargar pdf (Pagina 4)

– 4 –

3.0 SETUP

Place the WTTM Wire Terminal Tester on a level and stable work area where the user

can perform the testing in a comfortable manner. The surface should be clean and

grease-free, so that the instrument does not slip.

Make sure that there is no residue from the

pack-aging materials stuck under and around

any of the operating components especially in the

recessed area around the rotating terminal fixture

(see photo). Use of compressed air to clear any

debris from these areas is recommended.

Please note that the instrument weighs approximately 42 pounds (19 kg), so take care

when lifting and moving. We suggest that the instrument be located in close proximity

to an AC-Power outlet.

4.0 AC-O

PERATION

The WTTM must be operated using the AC-Adapter.

– 17 –

11.0 SPECIFICATIONS

Measuring Range* 0–50 Kg / 0–110 lbs / 0–500N or

0–100 Kg (0–220 lbs / 0–1000N)

(units selected via keypad)

Resolution 0.01Kg / 0.1 lbs / 0.1 N

Terminal adapter

slot width (mm) 0.5, 0.8, 1.0, 1.4, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 5.0, 6.0

Accuracy ±0.5% F.S. or better

Operating Mode

Continuous Displays actual value in Kg, lbs. or N

Peak-Hold Displays peak value in Kg, lbs. or N

Wire Diameter

SAE AS7928 II AWG 8. . .30

IEC 60352-2 Cross section 0.05. . .10mm

Maximum 0.236" (6mm)

Overload 120%

Display LCD, 4–1/2 digit, 12mm high

Update Time (msec)

Standard 1000, 500, 333, 200, 100, 50 (selectable)

Peak 1

Memory Peak Value

Power Supply AC adapter (100-240V/50-60 Hz)

Interface (RS232C) Baud rate: 2.4, 4.8, 9.6, 19.2 Kb (selectable)

Temp. Range

Operating 32 to104 °F (0 to 40 °C)

Storage –4 to 140 °F (–20 to 60 °C)

Weight, approx. 42lbs. (19 Kg)

Dimensions 14.2" x 6.3" x 3.33" (360 x 160 x 110 mm)

Protection Code IP40

Material Anodized aluminum, steel and stainless steel

* Low-range model available on special order basis.

1 2 3 4 5 6 7 8 9 10 11

Comentarios a estos manuales

Sin comentarios

Checkline WTTM-GEN1 Manual de usuario Pagina 4

Comentarios a estos manuales

Relacionado con productos y manuales para Instrumentos de medición Checkline WTTM-GEN1