Checkline TT Series Manual de usuario descargar pdf

The TT Digital Torque Tool Tester is a simple operation test instru-

ment for quickly checking torque tool performance. The TT Series

provides exceptional accuracy for measuring torque on various

products including torque wrenches, manual screwdrivers, elec-

tric screwdrivers, pneumatic screwdrivers and other torque con-

trolled power tools.

The TT’s provide long operation life and power flexibility with the

ability to work from the internal rechargeable battery or included

AC adapter. The TT’s have four modes of operation: Track for live

readings, Peak which records the highest level over a test, First

Peak which records the first peak reading over the test and Track/

Peak which shows both the live readings as well as the peak read-

ing recorded.

The backlit display provides an analog bar graph on screen to

allow the user to know where the resultant torque is currently po-

sitioned compared to the full scale range of the unit. CW/CCW

icons along with programmable pass/fail LED’s ( HI/OK/LO) assist

users with ensuring proper test set up along with enabling a quick

determination of the results.

Every tester comes standard with USB and RS-232 output. The

TT’s software enables the uploading of data and the additional

statistical analysis with its auto-calculation of the selected values.

These excellent features make the TT Torque Tool Testers a valu-

able and versatile addition to the production and quality control

departments.

TT Torque Tool Tester

Operation Manual

NIDEC-SHIMPO INSTRUMENTS

1) Overloading the transducer does not only damage the transducer but

may break the transducer head and could result in injury!

2) Torque ranges of 25 N-m and higher must be fastened properly with 4

bolts and nuts to a secure work surface, either horizontally or vertically.

Failing to do so may result in damage to the transducer and could result

in injury to the operator. Ranges 10 N-m and lower do not require mount-

ing and may be used with the included rubber feat as long as precaution

is taken and unit is secured to prevent slippage.

3) Ensure that the torque wrench’s driver has engaged the transducer

socket properly when operating. The transducer head may be damaged

if not engaged properly and could result in injury to the operator.

4) Please make sure that you have safety gear and safety precautions

in place when applying torque to the transducer or when calibrating

the transducer.

5) Do not use a charger other than the unit supplied with the TT torque

tester. Using the incorrect charger may result in damage to the Ni-MH

rechargeable batteries.

SPECIFICATIONS

Accuracy: ± 0.5 % of full-scale.(Includes Creep, Non-linearity &

Temperature Shift at zero load)

Units of Measure: N-mm, N-cm, N-m, in-lb, ft-lb, kg-cm, kg-m

(depending on range)

Measure Modes: Track, Peak, First-Peak, Track/Peak

Tool Socket Size: Dual 3/8”, 20 mm female square.

Overload Protection: 120% of Full Scale

Max. Mounting Torque: 150% of Full Scale

Sampling Rate: 1000 Hz

Peak Capture Rate: 0.10 S

Display: 175 x 1.125˝ (44.4 x 28.6 mm) dot matrix backlit LCD

Operating Temperature: 60 - 95 ºF (15 to 35 ºC)

Storage Temperature: 5 - 149 ºF (-15 to 65 °C)

Humidity Limit: Maximum 70% rH.

Power Requirement: 500 mA 9 VDC

Charging Time: Approx. 14-16 Hours for Full Charge

Battery Operation: 12 Hours

Output: USB 8 data bits Baud rate: 38400

Communication Ports: Both RS232 & USB simultaneous output

Size: 4 x 8 x 2” (100 x 200 x 50 mm);

TT-25: 4 x 9.8 x 2.3” (100 x 250 x 58 mm)

Product Weight: 2.4 lb (0.9 kg); TT-25: 4.9 lb (2.22 kg)

Package Weight: 5.1 lb (2.3 kg); TT-25: 7.7 lb (3.49 kg)

Warranty: 1 year

Included Accessories: USB cable, charger adapter, cal. cert.,

3/8” Hex rundown adapter (1, 5 & 10 N-m ranges only).

Optional Accessories: RS-232 cable, Rundown adapter

springs, Rundown adapters. Note: Software available for free

download at www.shimpoinst.com.

1 2 3 4 5 6

Indice de contenidos

Pagina 1 - NIDEC-SHIMPO INSTRUMENTS

The TT Digital Torque Tool Tester is a simple operation test instru-ment for quickly checking torque tool performance. The TT Series provides excepti

Pagina 2 - USING THE TT

INTRODUCTIONThank you for selecting the Nided-Shimpo TT series torque tool tester. With correct use and regular re-calibration, the TT tool tes-ter wi

Pagina 3

A load indicator bar alerts the operator how much load has been applied to the load sensor in relation to the full scale of the sensor.For clockwise

Pagina 4 - Command Action

Computer CommunicationA computer can communicate with the TT through either the RS-232 or USB connections. See commands and actions below.Output Signa

Pagina 5

Example: LOWER LEVEL = 0 N.m, UPPER LEVEL = 20 N.mFigure 6aExample: LOWER LEVEL = 20 N.m, UPPER LEVEL = 0 N.mFigure 6bExample: LOWER LEVEL = 10 N.m, U

Pagina 6 - CAPACITY & RESOLUTION

Range by unit (Resolution)Model N-mm N-cm N-m kgf-cm kgf-m in-lbf ft-lbfTT-0.5 500 (0.1) 50 (0.01) 0.5 (0.0001) 5.099 (0.001) 0.0509 (0.0001) 4.425 (0

Comentarios a estos manuales

Sin comentarios

Checkline TT Series Manual de usuario

Busca en linea o descarga Manual de usuario para Instrumentos de medición Checkline TT Series. Checkline TT Series User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Instrumentos de medición Checkline TT Series