Checkline WT3-200 Manual de usuario descargar pdf (Pagina 21)

Model WT3-200 Wire Terminal Pull Tester User’s Guide

Attach weight fixtures (brackets, hooks, etc), as required. Do not yet attach any weights or apply

any calibration loads. Then press ENTER.

7. The display will appear as follows:

Optionally exercise the load cell several times (at full scale, if possible), then press ENTER.

8. After displaying “PLEASE WAIT…” the display will appear as follows:

9. The display will appear as follows:

Apply a weight equal to the full scale of the instrument, then press ENTER.

Remove the load, leave the fixtures in place, then press ZERO.

10. The display will appear as follows:

CALIBRATION

ENSURE NO LOAD

THEN PRESS ZERO

CALIBRATION

GAIN ADJUST

APPLY FULL-SCALE LOAD

200.0 lbF +/-20%

THEN PRESS ENTER

CALIBRATION

Attach necessary

weight fixtures.

THEN PRESS ENTER

CALIBRATION

Optionally exercise

load cell a few times.

THEN PRESS ENTER

CALIBRATION

APPLY LOAD

1 OF 5

ENTER LOAD:

40.0 LBF

THEN PRESS ENTER

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29

Sin comentarios

Checkline WT3-200 Manual de usuario Pagina 21