Checkline ODT Manual de usuario descargar pdf (Pagina 3)

3.0 OPERATING PROCEDURE

3.1 Inserting the material to be measured

Carefully thread the material to be measured through the measuring roller

and roller guides, as shown below. It is important to ensure that the measured

material runs smoothly through the roller.

WARNING

To avoid damage do not move the center roller by hand

using force.

3.2 Setting the Maximum Tension Detector (optional)

Need copy?

Are there any other steps that need to be taken

before the gauge begins operating?

6.0 SPECIFICATIONS

Calibration According to factory procedure

Accuracy ± 1% full scale (FS) or ± 1 graduation on scale

Scale diameter 2.28 in (58mm)

Temperature range 50 to 113 °F (10 to 45 °C)

Air humidity 85% RH, max.

Housing material Chill-cast aluminum

Housing dimensions 3.1 in x 2.45 in x 1.1 in (78 x 62 x 27 mm) — L x W x H

Weight approx. 0.7 lbs. (300g)

7.0 TENSION RANGES/CALIBRATION MATERIAL

Model Range (grams) Calibration Material*

ODT-10 2-10 Faden: 25 tex

ODT-20 2-20 Faden: 25 tex

ODT-30 3-30 Faden: 25 tex

ODT-50 5-50 PA 0.12mm Ø

ODT-70 10-70 PA 0.12mm Ø

ODT-100 10-100 PA 0.12mm Ø

ODT-200 20-200 PA 0.20mm Ø

ODT-300 20-300 PA 0.20mm Ø

ODT-400 40-400 PA 0.20mm Ø

ODT-500 50-500 PA 0.20mm Ø

ODT-800 20-800 PA 0.20mm Ø

ODT-1K 50-1000 grams PA 0.30mm Ø

* Suitable for 95% of applications. PA = Polyamide Monofilament. If the material

to be measured differs significantly from the factory calibration material in diameter,

rigidity, shape, etc., we recommend calibration using customer material. For this

purpose, a material sample of about 5 m should be supplied. International unit for

tension force: 1 cN = 1.02 g = 0.01 N

1 2 3 4 5

Sin comentarios

Checkline ODT Manual de usuario Pagina 3