Checkline CAP-TNP Manual de usuario descargar pdf (Pagina 7)

- 7 -

NOTE: Use the MODE key to changes values of each function. Use the

Zero/RST key to move to the next function.

- 10 -

4. Press the Zero/RST key until the main

display shows HI limit.

5. Use the RECALL key to set the highlighted

digit from 0-9.

6. Press the MEM key to move from left to

right or to the next digit.

7. If iinvalid values are entered, the display

will blink momentarily indicating wrong

values entered to the HI and LO limits.

(HI>LO, HI=LO).

8. After entering the LO limit value and pressing

the Zero/RST button the torque tester will go back to normal operation.

The chart below shows how the Comparator values are changed and accessed

from the Function mode settings after F04.

1 2 3 4 5 6 7 8 9 10

Sin comentarios

Checkline CAP-TNP Manual de usuario Pagina 7