Checkline BP1 Manual de usuario Pagina 5

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 9
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 4
Electromatic Equipment Co., Inc.
-12-
10.0 TECHNICAL DATA
Resolution of the display 0,1% moisture content
0,5°C temperature
Measuring range 3 up to 20 % moisture content
Operation temperature 0°C up to 40°C
Storage temperature -20°C up to 60°C
Temperature compensation Automatically
Power supply 4 pcs. 1.5 Volt AA Alkaline batteries
(1800 measurements)
Automatically turn Off After 6 minutes
Current consumption 55 mA (with light)
Display 128 x 64 matrix display (lighted)
Dimensions 260 x 70 x 250 mm
Weight app. 1.3 kg (with batteries)
Degree of protection IP 40
Scope of supply Plastic case
Digital scale 1000g
Measuring cup 0.5 litre
4 x 1.5Volt AA Alkaline Batteries
Optional accessories PC-Interface
Software LogMemorizer
Printer
Electromatic Equipment Co., Inc.
-5-
3.0 CALIBRATION CURVES
Name of Calibration
curve
Fill quantity
Measuring range
limits
280g wood pellet 280g 3 up to 20%
250g spec.pell. 1 250g 3 up to 20%
250g spec.pell. 2 250g 3 up to 20%
250g spec.pell. 3 250g 3 up to 20%
reference -------- --------
Explanation of the curves:
280g wood pellet
: To analyze the moisture of Ø6 and Ø8 mm wood pellets with
a maximum length of 30mm.
According to norm CEN/TS 14961
If you do not want to measure wood pellets (or wood pellets with smaller bulk
density), you have to determine the moisture according to CEN/TS 14774 once
per sort and assign these to a sort calibration curve (special pellets 1 to 3). Fill
up the BP1 and switch through all curves. The characteristic with the smallest
deviation is the correct one for this sort of pellets!
Filling quantity 250g
Reference
: To test the humimeter BP1. Do not use for measuring the moisture!
List of calibration curves
Press in the measuring window the
or
key
for at least 3 seconds and a list with all available
sorts will appear. Select your sort by pressing
or
and confirm it with the key. The
measurement will continue automatically.
Vista de pagina 4
1 2 3 4 5 6 7 8 9

Comentarios a estos manuales

Sin comentarios